Description
- Countertops not included
- Island dimensions are 60″ x 34.5″ x 24″
- Cabinets to be fully assembled onsite
- Cabinetry will arrive flat shipped with each cabinet in it’s own box
- All moldings/panels/fillers will need to be cut to size onsite
- All cabinets come predrilled to be hinged to the right. If you want left hinging, you will need to use the provided touch up kit to fill in the predrilled hinge holes, and then redrill on the opposite side
- 3 to 4 business day lead time, followed by a 3 to 5 day transit period
- Finishing materials for unfinished backs and toe kicks of cabinets provided
- All hardware to build cabinets provided
- Cabinets can be adjusted to go in whichever order best suits your needs
- Cabinets can support the weight of granite countertops, however if you are using an extremely heavy material for counters, you can always look into alternative countertop support, or reinforce the cabinet interiors
- Knobs/pulls not included
Island is made up of the following components
| SKU | Title | Qty | Price |
| SW-B15 | Shaker White 15″ Base Cabinet | 2 | $285.83 |
| SW-3DB30 | Shaker White 30″ 3-Drawer Base Cabinet | 1 | $565.56 |
| SW-FPV4296 | Shaker White 42″ W x 96″ H Finished Plywood Panel | 1 | $115.57 |
| SW-FBM | Shaker White 3/4″ D x 4-15/16″ H x 96″ W Furniture Base Moulding | 2 | $89.63 |
| SW-OCM | Shaker White 96″ W x 3/4″ H x 3/4″ D Outside Corner Moulding | 1 | $41.50 |
| SW-SCR | Shaker White 1/4″ D x 3/4″ H x 96″ W Scribe Moulding | 1 | $18.87 |
| SW-TUK | Shaker White Touch-up Kit | 1 | $35.84 |
Specs:
| Face Frame | 3/4″ x 1-3/4″ Birch |
| Door Frame | Premium HDF (HDF is used to avoid cracking/warping) |
| Door Center | Premium HDF (HDF is used to avoid cracking/warping) |
| Door Frame Width | 2.75″ |
| Center Panel Beveled Edge | Yes |
| Sides | 1/2″ A-GradePlywood |
| Top & Bottom (Wall) | 1/2″ A-GradePlywood |
| Bottom (Base) | 1/2″ A-GradePlywood |
| Back Panel | 1/2″ A-GradePlywood Full Back |
| Shelves | Adjustable 3/4″ w/Front Edge Banding |
| Base Cabinet Shelf Depth | 12″ |
| Drawer Box | 5/8″ solid hardwood, dovetailed drawer box, 5/16″ Plywood Drawer Box Bottom, 5-Piece drawer front construction |
| Drawer Glides | Undermount, Full Extension, Soft Close Glides |
| Base Corner Supports | 3/4″ Solid Wood Corner Blocks |
| Overlay | Full |
| Hinges | 6-way Adjustable, Concealed, European Soft Close Hinges |
| Cabinet Interior | UV Coated Natural Interior(Prepped-for-glass cabinets will be finished to match the cabinet fronts) |
| Center Stile | None (unless listed in the cabinet description) |
| Assembly Method | Metal Clip or Glue & Staple: Cabinets come with Metal Clips (Cleats – not already installed on the cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Glued, clips will not be used |
| Finish | 7 step, acid-catalyzed finish process with a UV coating |
| Toe Kick | 1/2″ Plywood |
| Installation Rail | None |
| Wall Cabinet Bottoms Finished (Exterior) | Yes (just bottom panel, edges of side and back panel and recessed area is unfinished) |
| CARB Compliant | Yes |
| Door Hinges | Doors come pre-drilled for the hinges, the face frame has marks where to drill and the customer chooses Right or Left during assembly. |
| Toe Kicks Included w/Base Cabinets | Yes, but there will be a small gap when two cabinets are side by side, so the TKC (8′ toe kick) is needed if cabinets are next to each other. |
| Sides Panels Finished | Yes |
| Installation/Design Note | The full-overlay door style leaves roughly a 1/4″ clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2″ is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4″) which is within normal industry standards* Schematic images and renderingsare generic and may not represent exact construction details for each collection. The exact specificationsforthis collection can be found in theconstruction detailslisted above. |
Reviews
There are no reviews yet.